About 50 results
Open links in new tab
  1. Work Procedure Specifications for Internal and External ... - Civil4M

    Sep 16, 2017 · Wetting shall be uniform. To avoid cracks at the junction of concrete with masonry work, the plaster shall be reinforced at such junctions by fixing standard wire mesh (6 x 6 x …

  2. Why we do PCC before footings? - Civil4M

    Dec 11, 2017 · In any construction project, after excavation, PCC is done before footing. Why we do PCC at the base of footing, PCC have lower strength than concrete and it is placed at base?

  3. Deflection - A uniform rise in temperature on a portal frame

    Jan 17, 2018 · A uniform rise in temperature on a portal frame will cause - (a) No sway (b) May cause sway depending on the temperature (c) May cause sway depending on the relative …

  4. Uniform flow occurs when | Civil4M

    Jan 21, 2018 · Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at …

  5. Technical Specifications for Granular Sub Base (GSB) - Civil4M

    Jan 27, 2018 · GRANULAR SUB-BASE SCOPE This work shall consist of laying and compacting well-graded material on prepared subgrade in accordance with the requirements of …

  6. In Resource Leveling - Civil4M

    Jan 18, 2018 · In Resource Leveling - (a) Total duration Of Project is Reduced (b) Total duration Of Project is Increased (c) Uniform Demand of Resources is achieved (d) Cost of Project is …

  7. Normal depth in open channel flow is the depth of flow …

    Jan 21, 2018 · Normal depth in open channel flow is the depth of flow corresponding to (a) steady flow (b) unsteady flow (c) laminar flow (d) uniform flow (e) critical flow. The correct Answer Is …

  8. A one dimensional flow is one which - Civil4M

    Jan 21, 2018 · A one dimensional flow is one which (a) is uniform flow (b) is steady uniform flow (c) takes place in straight lines (d) involves zero transverse component of flow (e) takes place …

  9. AGGREGATE IMPACT TEST IS: 2386 (Part IV) - Civil4M

    Mar 29, 2018 · AGGREGATE IMPACT VALUE TEST IS: 2386 (Part IV) OBJECTIVE: To determine the impact value of the road aggregates. To assess their suitability in road …

  10. General energy equation holds for | Civil4M

    Jan 21, 2018 · General energy equation holds for (a) steady flow (b) turbulent flow (c) laminar flow (d) non-uniform flow (e) all of the above. The correct Answer Is (d) non-uniform flow